Reinforced Hollow Fiber Membrane

In addition to GENMBR ® modules, we also export our membranes as hollow fiber.
We use PVDF polymer with high chemical resistance in our hollow fiber membranes. Therefore, the chemical properties of the membranes such as pH and conductivity are resistant to problematic wastewater. In addition, it does not wear out against chemical factors.
We reinforce our membranes with a special support layer (PET). In this way, we enable you to use our membranes that are 5 times more durable mechanically with a long life. By reducing the cost of the GENMBR ® system, we enable your facility to complete its depreciation in a short time.
The membranes we use in GENMBR ® modules have an average pore diameter of 0.04 µm. It provides 95-98% treatment efficiency to suspended solids, bacteria and other pathogens. Thus, you can easily meet strict discharge standards or recycle wastewater as irrigation, washing or process water.

We design, project and install in accordance with the capacity you need, inlet concentrations and recovery limits. The design of GENMBR® membrane bioreactor modules belongs to MEMSIS. In addition, we manufacture our reinforced hollow fiber membranes with antifouling properties, which we use in modules, in the Tuzla facilities of MEMSİS.

As MEMSİS, we are proud to produce solutions suitable for the needs of changing times with our expert staff who have the principle of continuous improvement. Our membranes, produced entirely by MEMSİS, are used in wastewater treatment and reuse. If you want to get detailed information about our products, you can contact us with our contact information.
